Page 10 - Ritter pen new 2020
P. 10
INFORMATION
JOGGER refill BALANCE FLOW
Jogger _________________________________
ca. 2.000 m*
Tip brass nickel-plated, 1.0 mm TC-ball
ISO 12757-2 / document proof
Jogger Soft ____________________________
ca. 1.400 m*
Tip brass nickel-plated, 1.2 mm TC-ball
ISO 12757-2 / document proof
MARATHON refill BALANCE FLOW
Marathon ______________________________
ca. 2.500 m*
Tip brass nickel-plated, 1.0 mm TC-ball
ISO 12757-2 / document proof
Marathon Soft _________________________
ca. 1.800 m*
Tip brass nickel-plated, 1.2 mm TC-ball
ISO 12757-2 / document proof
ULTRA refill BALANCE FLOW
Ultra ___________________________________
ca. 6.000 m*
Tip Stainless steel, 1.0 mm TC-ball
ISO 12757-2 / document proof
Ultra Soft ______________________________
ca. 4.000 m*
Tip Stainless steel, 1.2 mm TC-ball
ISO 12757-2 / document proof
* Writing length is not exactly measurable, because of many criterions e. g. tolerances in TC-ball, ball bearing, ink paste, thus different ink flow, quality of paper, writing pressure, climate, TC-ball size, etc.
SCREEN-PRINT PAD-PRINT
The required film for screen printing must be applied in the The film must be side inverted. Color specifications (Pantone,
correct direction, for BASIC & VOLUMES color prints with register HKS, RAL) are required. Please consider the follo wing for
crosses. Colors will be printed according to your color specifi- halftone prints: Screen is halftone 48, (48 lines per centimeter),
cations (Pantone, HKS, RAL). Please consider the following for Halftone is between 20% and 80%.
half tone prints: Screen is halftone 40 (40 lines per centime ter),
Halftone is between 20% and 80% • Minimum line thickness for films (screen- and pad imprint) is
+0,15 mm and -0,3 mm.
• Despite the optimal matching of all imprinted components,
imprints on metal pens are only partially scratch resistant. • Regarding screen- and pad-prints according to color specifica-
tions (Pantone, HKS or RAL)on colored barrels, please consider
that it might be necessary to print white background (i.e. one
DIGITAL PRINTING additional printing color)
In this procedure, the logo is printed directly on the ball point • Despite the optimal matching of all imprinted components,
pen and is used with our Crest models (on the clip) and Tri-Star imprints on metal pens are only partially scratch resistant.
(on clip and barrel). Digital printing is particu larly suitable for
multi-color logos and color gradients. The colors are converted
into CMYK and therefore can differ slightly from the Pantone data.
When creating the data please note that the required size for the LASER ENGRAVING
respective model. To be foliated, 3 mm of trimming is required on
the right and left sides. For laser engraving we need high resoluted files (look at „FILES“)
B8 B8